We will need knuckle to knuckle measurements also passenger side knuckle to pitman arm.
Measure from center to center on each location
Please send Exact measurements to bronck@worldnet.att.net

BULLET PROOF ROD ENDS©

    -  LIFETIME REPLACEMENT WARRANTY on breakage of our H.D. Steering Rod Ends*
    -  LIMITED LIFETIME REPLACEMENT WARRANTY on wear & tear or even abuse!**
    -  Not just any off-the shelf rod end! MADE TO OUR SPECS JUST FOR THIS APPLICATION
    -  Up to 5 TIMES TIGHTER than most other cheaper AND more expensive "Heim" joints
    -  Up to 10 TIMES TIGHTER than most OEM tie rod ends
    -  Work absolutely excellent in the deepest Mud, Sand, Snow, Water, Dirt, Rocks and Woods.
    -  NO GREASE needed
    -  NO MAINTENANCE required
    -  NO EXTERNAL SEALS to maintain or wear out, tear or fail
    -  Average 10 YEAR LIFE expectancy
    -  Each one INDIVIDUALLY HAND CHECKED, TESTED AND INSPECTED before assembly
    -  Increased DURABILITY AND RELIABILITY
    -  OUTLASTS STANDARD OEM BALL & SOCKET ENDS up to 3 times longer
    -  STRONGER MATERIAL than typical mild steel, mass produced OEM tie rod ends
    -  Tested at an average of  4 TIMES STRONGER than the average OEM tie rod ends
    -  Compact design at only 7/8" radius, 13% MORE COMPACT than other h.d. OEM ends
    -  OVER 11 YEARS OF PROVEN PERFORMANCE and Reliability in the field and on the track
    -  EASILY REMOVED No banging and pounding to remove from the knuckles or pitman arm
    -  20 DEGREE vertical articulation results in 29" of travel using an average 41" long drag link.

    BULLET PROOF TUBING©

    -  LIFETIME REPLACEMENT WARRANTY on breakage or failure of our tubing*
    -  MADE BY HAND, one at a time and each one individually inspected from start to finish
    -  Each tube fully assembled to GUARANTEE FIT, FINISH & QUALITY before shipment
    -  Tested at an average of 3 TIMES STRONGER than OEM tie rods
    -  Meticulously fully MACHINED AND MILLED to exacting tolerances
    -  NO WELDS TO FAIL or heat to DECREASE TUBING STRENGTH
    -  ONE PIECE TUBING with no inserts, bushings, sleeves or adaptors… ROCK SOLID!
    -  NO NEED TO REMOVE Knuckle or Pitman to modify for installation.
    -  NO SPECIAL TOOLS NEEDED   -   NO EXPENSIVE REAMERS REQUIRED
    -  Can be INSTALLED IN LESS THAN 45 MINUTES with detailed & easy to follow illustrations
    -  LESS DRAG LINK ANGLE  to reduce BUMP STEER on highly lifted vehicles
    -  LESS ROD END JOINT ANGLE for INCREASED ARTICULATION and travel
    -  TIE ROD can also  be mounted ON TOP OF KNUCKLES for even less joint angles and to
        protect from terrain obstacle impacts (optional)
    -  FLEXIBLE-Will withstand impacts and REBOUND BACK from up to a 4" HIT***
    -  Optional SUPER HEAVY DUTY TUBING for the severest of situations, available
    -  CUSTOM DESIGNED to your particular vehicle specs and application
    -  Standard 3/4-16 thread ACCEPTS ANY TYPICAL SPHERICAL ROD END if needed
    -  SHOT PEENED AND HAND POLISHED to meet stress relief requirments for maximum flex.
    -  Beautifully show finished in HARDCOAT POLYURETHANE
    -  HEAT TREATED and drawn to 485 degrees for 4 hours
    -  FULLY USER ADJUSTABLE without having to remove anything or loosen any bolts
    -  Tested and survived FOURWHEELER MAGAZINE's TOP TRUCK CHALLENGE. After 10
        years of trail usage, inspection upon removal proved them to still be readily capable for more!

    BULLET PROOF HARDWARE©

    -  LIFETIME REPLACEMENT WARRANTY on breakage or failure of any piece of hardware*
    -  We include one of the STRONGEST BOLTS IN THE WORLD in every kit we sell (F911's)
    -  All of our installation hardware is DESIGNED AND MACHINED IN HOUSE  by us
    -  Special patented ROD END RETAINER CAPS keep rod end engaged to the steering system
       even in the event of total bearing failure.
 

Home | Top | Track Order| Ordering Info | Product Development| Products | Members Rigs | Tool Box