SIERRA BRONCO SHOP


 

ALL PRICES INCLUDE SHIPPING CHARGES IN THE CONTINENTAL U.S
CALIFORNIA RESIDENTS WILL BE CHARGED SALES TAX

RS99012 9-Way Adjustable Shocks

*Nine settings adjust compression/rebound damping for precise ride control
*All shocks easily adjusted while mounted on vehicle
*Set desired performance curve: firm for off-road; soft for street and highway use
THESE SHOCKS WILL NOT RAISE OR LOWER YOUR VEHICLE, BUT ADJUST THE
RIDE YOU GET.
Fully adjustable from setting 1 to 9 for better off road performance.

Rancho 99012, Price $113.00 

4 Rancho 99012, Price $419.00 
 
 
 

REAR SHOCK MOUNTS


Rear Double Shock Mounts
These mounts are like the factory ones (weld-on) made with a solid steel shaft, machined on the end. Beware of the junky imitations
that use tubing with a bolt welded in the end, the first time you hit a hard bump they break. These mount in the forward position and
you use the same shock length as the rear position.
Rear Double Shock Mounts - Price per set  60.00 
 
 
 


Rear Inboard Shock Hoop Kit
If you just can't bear the thought of cutting out the rear wheel wells to install our Extreme Rear Hoops but you still want long travel
capabilities, then the inboard hoop will be the ticket for you. This rear hoop welds on inside the frame rails above the rearend.
The shock mounting position (late 66-77) then you can use the same rear shock you have now, just remount them on the new hoop.
These come powder black and include mounting hardware.
Rear Inboard shock hoop - Price- 130.00 
 
 
 
 

FRONT SHOCK MOUNTS
 


The Original Shock Hoops
These hoops allow for mounting of longer shocks (10"-11" straight up and down travel) which
will allow our springs to work to their full potential, and they look as good as they function.
Shock hoops are made from 1 1/2" .120 wall steel tubing, and they come with all necessary hardware and lower brackets.
Original Front Shock Hoops - Price per set -  160.00 
 
 
 


Extreme Front Shock Hoops
Not only do the Extreme shock hoops look great but they are totally functional too. This style of shock hoop was developed for the early Bronco
to take advantage of duel front shock that would not interfere with other front-end modifications such as the tie rod
over the knuckle conversion and custom anti-sway bars. The Extreme hoops are made from 1 1/2" .120
wall steel tubing and they come with all necessary hardware and instructions. Welding is required for installation.
Hoops can be painted as desired. The use of the front mounting position is optional for those who want to run three shocks per side.
1966-1975 Extreme Front Shock Hoops - Price per set 190.00 
1976-1977 Extreme Front Shock Hoops - Price per set 190.00 
 
  An important note for 76-77 Broncos. The driver's side wheel well slopes downward to allow clearance for the factory power brakes. This will require a 2 inch body lift to fit properly.
 
 
 
 


Long Travel Shock Towers

Here is a deal! Stamped steel shock towers. These can be used in a number of positions for custom front shock mounting.
This is a quick and easy way to add the needed room for mounting longer shocks. You can run singles,
doubles or triple front shocks, it's up to you. These are sold in pairs and require welding for installation.
Long Travel Shock Towers - Price per set 50.00 
 
 
 
 
 


Front Double Shock Brackets
 This is the "Old School" method of mounting extra front shocks. These are very strong and easy to install.
SB brackets have multiple mounting positions available to accommodate different size shocks. Welding is required. They come with all necessary mounting hardware and instructions.
Front Double Shock Brackets Price per set 50.00 
 
 
 
 
 

Home | Top | Track Order| Ordering Info | Product Development| Products | Members Rigs | Tool Box


Sierra Bronco
971 Winterpark lane
Turlock, CA. 98380
SB
Voice Pager - 209-567-7707
Phone "After 4:00pm" - 209-668-7806
Email bronck@worldnet.att.net